Home Page | About Us| Contact

AVAILABLE WITH ONE DOOR ONLY.
* POWER SUPPLY BOX ON TOP OF PRESS AS STANDARD.

• WORKING AREA:
  LENGHT: 720 mm x WIDTH: 620mm(28.3" x 24.4")
  STACK HEIGHT= min 55 ~ max 165 mm
  (min 2.2" ~ max 6.5")
• MAX FORCE CAPACITY:
  52 TONS (520kn); 10 bar ON AIR BAG
• VACUUM:
  PUMP CAPACITY = 40 m³/h
  VACUUM LEVEL = BETTER THAN -900 mbar
• MAX WORKING TEMPERATURE:
  STANDARD : 205° C
  OPTIONAL : 300 ° C
• ELECTRICAL DATA:
  LINE = 3 PH + GND; VOLTAGE ON REQUEST.
  POWER = 65 kva
  MAX CURRENT IN THE STACK = 825 A Adc
  MAX VOLTAGE ON THE STACK = 90 V Vdc
• COMPRESSED AIR:
  PRESSURE = 6 ~ 10 bar
  CONSUMPTION = 520 NL / cycle
• DIMENSIONS:
  LENGHT: 1420 mm; WIDTH: 1600 mm ; HEIGHT: 2940 mm;
  
• WEIGHT:
  4600 Kg (PRESS ) + 1200 Kg (POWER BOX)
  TOT. 5800 Kg
• REQUESTED FLOOR WEIGHT CAPACITY:
  3500 Kg/m ²
• REQUESTED ROOM HEIGHT:
  4 m

DESCRIPTION:

THE ADARA PRESS ® 52 USES THE NEW REVOLUTIONARY TECHNOLOGY FOR
MULTILAYERS AND BASE MATERIALS PRODUCTION.
IT HAS A SINGLE OPENING WHERE THE HIGH STACK OF MATERIAL IS PLACED.
THE STACK IS HEATED BY JOULE EFFECT DIRECTLY GENERATED, IN ITS
CONTINUOUS COPPER FOIl, THANKS TO CURRENT CIRCULATION.
BY THIS SYSTEM EACH LAYER OF THE STACK IS HEATED UNIFORMLY AND IN
ACCORDANCE WITH THE HEATING PROFILE MORE SUITABLE FOR EACH PREPREG TYPE.
HEATING PROFILE, PRESSURE, VACUUM AND ALL OTHER PROCESS PARAMETERS ARE HANDLED
AND CONTROLLED BY COMPUTER.
THE PRESSURE ON THE STACK IS APPLIED BY A FLOATING PLATE MOVED BY AN AIRBAG.
THIS PRESSURE SYSTEM GUARANTEES HIGH THICKNESS ACCURACY. THE MAIN CHARACTERISTIC OF ADARA MODEL 52 IS THE POSSIBILITY TO REDUCE ITS OPENING,
MOVING THE BOTTOM PARTS OF THE PRESS BY HYDRAULIC CYLINDERS.
OPENING CAN BE MODIFIED FROM 160 mm TO ~ 55mm.

ADVANTAGES:

1. HIGH PRODUCTIVITY.
2. HIGH TEMPERATURE RISE (MORE THAN 10°C /min).
3. HIGH SURFACE QUALITY.
4. PROGRAMMABLE HEATING PROFILE.
5. VERY HIGH DIMENSIONAL STABILITY AND THICKNESS ACCURACY.
6. LOW ENERGY CONSUMPTION.
7. TEMPERATURE UNIFORM THROUGHOUT THE STACK.